... | @@ -84,22 +84,24 @@ Additionally, settings can be *internal* or not. Non internal settings can also |
... | @@ -84,22 +84,24 @@ Additionally, settings can be *internal* or not. Non internal settings can also |
|
|
|
|
|
Some settings might be hidden in the UI depending on certain conditions (e.g., ```brim_distance_to_print_mm``` will be hidden if ```add_brim``` is false). As mentioned before, there also exist internal settings that can also be set in ```features.lua``` but not through the UI. We list them here:
|
|
Some settings might be hidden in the UI depending on certain conditions (e.g., ```brim_distance_to_print_mm``` will be hidden if ```add_brim``` is false). As mentioned before, there also exist internal settings that can also be set in ```features.lua``` but not through the UI. We list them here:
|
|
|
|
|
|
* ```xy_mm_per_int``` : Polygonal integer grid scale (mm/int) **[integer]**
|
|
| Internal name | Type | Description |
|
|
* ```extruder_count``` : Number of extruders installed on the printer **[integer]**
|
|
| ------ | ------ | ------ |
|
|
* ```extruder_mix_count_e``` : Number of mixed filaments on extruder ```e``` **[integer]**
|
|
| ```xy_mm_per_int``` | _integer_ | Polygonal integer grid scale (mm/int) |
|
|
* ```priming_mm_per_sec``` : Speed for prime/retract (mm/sec) **[float]**
|
|
| ```extruder_count``` | _integer_ | Number of extruders installed on the printer |
|
|
* ```retract_perimeter_safety_distance_mm``` : Retract distance on perimeter end (mm) **[float]**
|
|
| ```extruder_mix_count_[e]``` | _integer_ | Number of mixed filaments on extruder ```e``` |
|
|
* ```tower_at_location```: Set tower location **[bool]**
|
|
| ```priming_mm_per_sec``` | _float_ | Speed for prime/retract (mm/sec) |
|
|
* ```tower_location_x_mm```: Set tower X (mm) location w.r.t. the printing bed's closest left corner [front-facing] **[float]**
|
|
| ```retract_perimeter_safety_distance_mm``` | _float_ | Retract distance on perimeter end (mm) |
|
|
* ```tower_location_y_mm```: Set tower Y (mm) location w.r.t. the printing bed's closest left corner [front-facing] **[float]**
|
|
| ```tower_at_location``` | _bool_ | Use custom-defined tower location |
|
|
* ```bed_part_offset_x_mm```: Set bed offset (mm) w.r.t. the geometry's center on the X axis **[float]**
|
|
| ```tower_location_x_mm``` | _float_ | Set tower X (mm) location w.r.t. the printing bed's closest left corner [front-facing] |
|
|
* ```bed_part_offset_y_mm```: Set bed offset (mm) w.r.t. the geometry's center on the Y axis **[float]**
|
|
| ```tower_location_y_mm``` | _float_ | Set tower Y (mm) location w.r.t. the printing bed's closest left corner [front-facing] |
|
|
* ```cycle_gap_mm```: space (mm) gap at the end of a path whenever it closes onto itself<sup>3</sup> **[float]**
|
|
| ```bed_part_offset_x_mm``` | _float_ | Set bed offset (mm) w.r.t. the geometry's center on the X axis |
|
|
* ```enable_zigzag_cover_strict_ordering_b``` : Enable strict ordering for cover zigzag infill on brush ```b``` **[bool]**
|
|
| ```bed_part_offset_y_mm``` | _float_ | Set bed offset (mm) w.r.t. the geometry's center on the Y axis |
|
|
* ```zigzag_cover_strict_ordering_angle_b``` : Angle for strict ordering of cover zigzag infill on brush ```b``` **[float]**
|
|
| ```cycle_gap_mm``` | _float_ | space (mm) gap at the end of a path whenever it closes onto itself<sup>3</sup> |
|
|
* ```preserve_zigzag_strict_ordering_``` : Preserve zigzag ordering for dense surfaces on brush ```b``` **[bool]**
|
|
| ```enable_zigzag_cover_strict_ordering_[b]``` | _bool_ | Enable strict ordering for cover zigzag infill on brush ```b``` |
|
|
* ```cover_flow_multiplier_``` : Cover flow multiplier for brush ```b``` **[float]**
|
|
| ```zigzag_cover_strict_ordering_angle_[b]``` | _float_ | Angle for strict ordering of cover zigzag infill on brush ```b``` |
|
|
* ```mixing_wipe_length_mm``` : Wipe length when printing with multiple materials **[float]**
|
|
| ```preserve_zigzag_strict_ordering_``` | _bool_ | Preserve zigzag ordering for dense surfaces on brush ```b``` |
|
|
|
|
| ```cover_flow_multiplier_``` | _float_ | Cover flow multiplier for brush ```b``` |
|
|
|
|
| ```mixing_wipe_length_mm``` | _float_ | Wipe length when printing with multiple materials |
|
|
|
|
|
|
<sup>3. If set to 0 you are likely to obtain a small blob because the tail of the path overlaps the head. Set it too large and you will obtain a gap. If left unset the setting will default to a reasonable built-in value (auto computed from the nozzle diameter).</sup>
|
|
<sup>3. If set to 0 you are likely to obtain a small blob because the tail of the path overlaps the head. Set it too large and you will obtain a gap. If left unset the setting will default to a reasonable built-in value (auto computed from the nozzle diameter).</sup>
|
|
|
|
|
... | | ... | |