Attention une mise à jour du service Gitlab va être effectuée le mardi 30 novembre entre 17h30 et 18h00. Cette mise à jour va générer une interruption du service dont nous ne maîtrisons pas complètement la durée mais qui ne devrait pas excéder quelques minutes. Cette mise à jour intermédiaire en version 14.0.12 nous permettra de rapidement pouvoir mettre à votre disposition une version plus récente.

Commit d733e219 authored by GILLES Sebastien's avatar GILLES Sebastien
Browse files

#0 Remove unused Lua file.

parent 27822aac
-- Comment lines are introduced by "--".
-- In a section (i.e. within braces), all entries must be separated by a comma.
transient = {
-- Tells which policy is used to describe time evolution.
-- Expected format: "VALUE"
-- Constraint: value_in(v, {'constant_time_step', 'variable_time_step'})
time_evolution_policy = "constant_time_step",
-- Time at the beginning of the code (in seconds).
-- Expected format: VALUE
-- Constraint: v >= 0.
init_time = 0.,
-- Time step between two iterations, in seconds.
-- Expected format: VALUE
-- Constraint: v > 0.
timeStep = 0.1,
-- Minimum time step between two iterations, in seconds.
-- Expected format: VALUE
-- Constraint: v > 0.
minimum_time_step = 1.e-6,
-- Maximum time, if set to zero run a static case.
-- Expected format: VALUE
-- Constraint: v >= 0.
timeMax = No default value was provided!
} -- transient
NumberingSubset1 = {
-- Name of the numbering subset (not really used; at the moment I just need one input parameter to ground
-- the possible values to choose elsewhere).
-- Expected format: "VALUE"
name = No default value was provided!,
-- Whether a vector defined on this numbering subset might be used to compute a movemesh. If true, a
-- FEltSpace featuring this numbering subset will compute additional quantities to enable fast computation.
-- This should be false for most numbering subsets, and when it's true the sole unknown involved should be a
-- displacement.
-- Expected format: 'true' or 'false' (without the quote)
do_move_mesh = false
} -- NumberingSubset1
Mesh1 = {
-- Path of the mesh file to use.
-- Expected format: "VALUE"
mesh = No default value was provided!,
-- Format of the input mesh.
-- Expected format: "VALUE"
-- Constraint: value_in(v, {'Ensight', 'Medit'})
format = "Medit",
-- Highest dimension of the input mesh. This dimension might be lower than the one effectively read in the
-- mesh file; in which case Coords will be reduced provided all the dropped values are 0. If not, an
-- exception is thrown.
-- Expected format: VALUE
-- Constraint: v <= 3 and v > 0
dimension = No default value was provided!,
-- Space unit of the mesh.
-- Expected format: VALUE
space_unit = 1.
} -- Mesh1
Unknown1 = {
-- Name of the unknown (used for displays in output).
-- Expected format: "VALUE"
name = No default value was provided!,
-- Index of the god of dof into which the finite element space is defined.
-- Expected format: "VALUE"
-- Constraint: value_in(v, {'scalar', 'vectorial'})
nature = No default value was provided!
} -- Unknown1
Domain1 = {
-- Index of the geometric mesh upon which the domain is defined (as defined in the present file). Might be
-- left empty if domain not limited to one mesh; at most one value is expected here.
-- Expected format: {VALUE1, VALUE2, ...}
mesh_index = No default value was provided!,
-- List of dimensions encompassed by the domain. Might be left empty if no restriction at all upon
-- dimensions.
-- Expected format: {VALUE1, VALUE2, ...}
-- Constraint: value_in(v, {0, 1, 2, 3})
dimension_list = No default value was provided!,
-- List of mesh labels encompassed by the domain. Might be left empty if no restriction at all upon mesh
-- labels. This parameter does not make sense if no mesh is defined for the domain.
-- Expected format: {VALUE1, VALUE2, ...}
mesh_label_list = No default value was provided!,
-- List of geometric element types considered in the domain. Might be left empty if no restriction upon
-- these. No constraint is applied at  LuaOptionFile level, as some geometric element types could be added
-- after generation of current input parameter file. Current list is below; if an incorrect value is put
-- there it will be detected a bit later when the domain object is built.
-- The known types when this file was generated are:
-- . Point1
-- . Segment2, Segment3
-- . Triangle3, Triangle6
-- . Quadrangle4, Quadrangle8, Quadrangle9
-- . Tetrahedron4, Tetrahedron10
-- . Hexahedron8, Hexahedron20, Hexahedron27.
-- Expected format: {"VALUE1", "VALUE2", ...}
geometric_element_type_list = No default value was provided!
} -- Domain1
Result = {
-- Directory in which all the results will be written. Please do not read this value
-- directly: it might have been extended in MoReFEMData class! Rather call the GetResultDirectory() from
-- this class.
-- Expected format: "VALUE"
output_directory = No default value was provided!,
-- Enables to skip some printing in the console. Can be used to WriteSolution every n time.
-- Expected format: VALUE
display_value = 1,
-- Defines the solutions output format. Set to false for ascii or true for binary.
-- Expected format: VALUE
binary_output = false
} -- Result
FiniteElementSpace1 = {
-- Index of the god of dof into which the finite element space is defined.
-- Expected format: VALUE
god_of_dof_index = No default value was provided!,
-- Index of the domain onto which the finite element space is defined. This domain must be unidimensional.
-- Expected format: VALUE
domain_index = No default value was provided!,
-- List of all unknowns defined in the finite element space. Unknowns here must be defined in this file as
-- an 'Unknown' block; expected name/identifier is the name given there.
-- Expected format: {"VALUE1", "VALUE2", ...}
unknown_list = No default value was provided!,
-- List of the shape function to use for each unknown;
-- Expected format: {"VALUE1", "VALUE2", ...}
shape_function_list = No default value was provided!,
-- List of the numbering subset to use for each unknown;
-- Expected format: {VALUE1, VALUE2, ...}
numbering_subset_list = No default value was provided!
} -- FiniteElementSpace1
Petsc1 = {
-- Absolute tolerance
-- Expected format: VALUE
-- Constraint: v > 0.
absoluteTolerance = 1e-50,
-- gmresStart
-- Expected format: VALUE
-- Constraint: v >= 0
gmresRestart = 200,
-- Maximum iteration
-- Expected format: VALUE
-- Constraint: v > 0
maxIteration = 1000,
-- Preconditioner to use. Must be lu for any direct solver.
-- Expected format: "VALUE"
-- Constraint: value_in(v, {'lu', 'none'})
preconditioner = 'lu',
-- Relative tolerance
-- Expected format: VALUE
-- Constraint: v > 0.
relativeTolerance = 1e-9,
-- Step size tolerance
-- Expected format: VALUE
-- Constraint: v > 0.
stepSizeTolerance = 1e-8,
-- Solver to use.
-- Expected format: "VALUE"
-- Constraint: value_in(v, { 'Mumps', 'Umfpack', 'Gmres' })
solver = 'Mumps'
} -- Petsc1
-- File that gives for each vertex on the first mesh on the interface the index of the equivalent vertex in
-- the second mesh.
-- Expected format: "VALUE"
interpolation_file = No default value was provided!
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment